Seite 1 von 1

Sicherung steht bei 0%

Verfasst: 13. Mär 2011, 16:30
von InTimo
Hallo,

habe jetzt endlich meinen Rechner neu installiert - Win7 Home Premium 64bit auf einer SSD (Vertex2 120GB) .. läuft echt genial.

Jedenfalls wollte ich eine Sicherung vom "sauberen" Windows machen, aber die Sicherung steht nun schon seit ca. 15min auf 0% :(

Nun kam ne Meldung - Sicherung nicht möglich - chkdsk /f /r ausführen. Werd ich gleich mal machen

Womit kann das zusammen hängen ?? Für die SSD ist defrag/windows search/schattenkopie/wiederherstellung/superfetch & ruhezustand deaktiviert ..

Timo

Re: Sicherung steht bei 0%

Verfasst: 13. Mär 2011, 16:46
von Nobby1805
Schau mal in den Logfile BackupEngine... auf dem Client

Re: Sicherung steht bei 0%

Verfasst: 13. Mär 2011, 16:57
von InTimo
Hallo..

blöd gefrat: wo finde ich die denn ??

Grad kam wieder die chkdsk Meldung, obwohl ich vorhin genau diesen Befehl nach Neustart ausführen lassen habe :(

Re: Sicherung steht bei 0%

Verfasst: 13. Mär 2011, 17:09
von Nobby1805
Die chkdsk-Meldung kommt nur als Hinweis, da könnte es dran liegen ... hast du den CHKDSK auch für die richtige Partition durchgeführt ?
Was für Windows läuft denn auf den Client .. davon ist auch abhängig wo der Log steht ... schau mal hier: viewtopic.php?f=49&t=1294

Re: Sicherung steht bei 0%

Verfasst: 13. Mär 2011, 17:15
von InTimo
Hallo .. Client siehe oben ;) (Win7 Home Premium 64bit) .. LOG sieht so aus ..

Code: Alles auswählen

Created at 13.03.2011 16:46:51
***** Started at 13.03.2011 16:46:51 ***
***** Started at 13.03.2011 16:46:51 ***
[1]110313.164651.0880: Status: Start
[1]110313.164651.3688: Status: Connect to server SCALEO, session 54bc0eba-fca9-4283-b020-534c0573f753, protocol 20
[1]110313.164651.5092: Status: Volume 7a473fc8-4d5a-11e0-8c00-806e6f6e6963 = C:
[1]110313.164651.8680: Status: Acquire volume shadows
[1]110313.164651.9304: Status: Volume C: not supported by VSS
[1]110313.164651.9460: Status: Exception in CreateShadowVolume: ShadowVolumeException Volume C: not supported by VSS
   bei Microsoft.HomeServer.Backup.VSS.ShadowVolumeSet.CreateShadowVolume(VolumeInfo[] volumes)
[1]110313.164651.9460: Status: VSS snapshot attempt 1 failed
[1]110313.164751.9593: Status: Volume C: not supported by VSS
[1]110313.164751.9593: Status: Exception in CreateShadowVolume: ShadowVolumeException Volume C: not supported by VSS
   bei Microsoft.HomeServer.Backup.VSS.ShadowVolumeSet.CreateShadowVolume(VolumeInfo[] volumes)
[1]110313.164751.9593: Status: VSS snapshot attempt 2 failed
[1]110313.164951.9703: Status: Volume C: not supported by VSS
[1]110313.164951.9703: Status: Exception in CreateShadowVolume: ShadowVolumeException Volume C: not supported by VSS
   bei Microsoft.HomeServer.Backup.VSS.ShadowVolumeSet.CreateShadowVolume(VolumeInfo[] volumes)
[1]110313.164951.9703: Status: VSS snapshot attempt 3 failed
[1]110313.165323.0231: Status: Volume C: not supported by VSS
[1]110313.165323.0231: Status: Exception in CreateShadowVolume: ShadowVolumeException Volume C: not supported by VSS
   bei Microsoft.HomeServer.Backup.VSS.ShadowVolumeSet.CreateShadowVolume(VolumeInfo[] volumes)
[1]110313.165323.0231: Status: VSS snapshot attempt 4 failed
[1]110313.165723.0565: Status: Volume C: not supported by VSS
[1]110313.165723.0565: Status: Exception in CreateShadowVolume: ShadowVolumeException Volume C: not supported by VSS
   bei Microsoft.HomeServer.Backup.VSS.ShadowVolumeSet.CreateShadowVolume(VolumeInfo[] volumes)
[1]110313.165723.0575: Status: VSS snapshot attempt 5 failed
[1]110313.165723.0615: Status: Exception: ClientVssProblem
[1]110313.165723.0635: Status: Bytes sent=30, bytes received=19, 0 reconnects
Will nur die C: Windows Partition sichern - die "versteckte" nicht ..

Timo

Re: Sicherung steht bei 0%

Verfasst: 13. Mär 2011, 17:35
von InTimo
Hallo .. kann es an der bei mir am Client deaktivierten Schattenkopie liegen ?? - http://social.microsoft.com/Forums/en-U ... e25f1b6821

Re: Sicherung steht bei 0%

Verfasst: 13. Mär 2011, 17:39
von Nobby1805
Entscheide dich in welchem Thread du das Thema weiter behandeln willst ... :(

Re: Sicherung steht bei 0%

Verfasst: 13. Mär 2011, 18:17
von Nobby1805